A
-
Abdollahei sharif, Jafar
Study of the effects of the environmental factors on mining effluents phytoremediation process efficiency using cognitive map method (Case study: Sungun copper mine) [Volume 8, Issue 15, 2018, Pages 11-24]
-
Ahmadi, Reza
Application of geometric probability to design exploration grid of mineral deposits, case study: porphyry copper index located in the south-west of Kerman [Volume 8, Issue 15, 2018, Pages 39-54]
-
Ajalloeian, Rasoul
Effects of Stress Value and Loading Plate Dimensions on In-situ Deformation Modulus of Rock Mass in Plate Loading Test [Volume 8, Issue 16, 2018, Pages 95-106]
-
Amir Fattahi, Rasoul
Improving Filtersim Simulation Algorithm of Multiple-Point Geostatistics Using New Training Image Based Adaptive Filters and Supervised Hard Data Conditioning [Volume 8, Issue 15, 2018, Pages 55-67]
-
Ansari, Abdolhamid
Two-Dimensional Compact Inversion of Magnetic Data in the Presence of Remanent Magnetization [Volume 8, Issue 17, 2019, Pages 39-51]
-
Ataei, Mohammad
Mining Spare Parts Provision by Reliability Analysis, Case Study: Sungun Copper Mine [Volume 8, Issue 15, 2018, Pages 25-38]
-
Ataei, Mohammad
Effects of Blast Vibration on Unplanned Dilution in an Underground Metal Mine [Volume 8, Issue 17, 2019, Pages 77-90]
-
Azinfar, Mohamad Javad
The effect of scale on the geometric parameters of the rock joint surfaces [Volume 8, Issue 15, 2018, Pages 99-114]
-
Azinfar, Mohamad Javad
Effect of Rock Fracture Filling on Mode I and II Fracture Toughness [Volume 8, Issue 17, 2019, Pages 19-25]
B
-
Bajolvand, Mehdi
Investigate the effect of rock mass joint intensity on performance of support systems in the tunnel by using DFN-DEM numerical modeling (Case study: the access tunnel of Rudbar Lorestan Dam plant) [Volume 8, Issue 16, 2018, Pages 13-27]
-
Bakhtavar, Ezzeddin
A Developed Fuzzy Goal Programming Approach to Determine a Processing Plant Site [Volume 8, Issue 15, 2018, Pages 1-9]
-
Barkhordari, Kazem
Dynamic Analysis of Anchored Diaphragm Walls [Volume 8, Issue 15, 2018, Pages 83-97]
-
Barkhordari Bafghi, kazem
Dynamic Analysis of Embankments Reinforced with Micro-Piles [Volume 8, Issue 17, 2019, Pages 53-61]
D
-
Darbor, Mohammad
Evaluation of Specimen Size-Effect in Sedimentary Rocks and Grain Size Effect in Concrete Specimens on Uniaxial Compressive Strength [Volume 8, Issue 16, 2018, Pages 57-70]
-
Daya, Ali Akbar
Comparative analysis between concentration- number (C-N) and concentration- area (C-A) fractal models for separating anomaly from background in Siahrood 100,000 sheet, NW Iran. [Volume 8, Issue 16, 2018, Pages 87-94]
-
Dehghani, Ali
Simulation of Choghart AG mill circuit using JKSimMet software and investigating the possibility of converting to SAG mill [Volume 8, Issue 16, 2018, Pages 71-85]
F
-
Faramarzi, Lohrasb
Evaluation of Specimen Size-Effect in Sedimentary Rocks and Grain Size Effect in Concrete Specimens on Uniaxial Compressive Strength [Volume 8, Issue 16, 2018, Pages 57-70]
-
Fatehi Marji, Mohammad
Discontinued Rock Slope Analysis through a New TFS-KGM Analytical Method [Volume 8, Issue 17, 2019, Pages 1-18]
-
Fathianpour, Nader
Improving Filtersim Simulation Algorithm of Multiple-Point Geostatistics Using New Training Image Based Adaptive Filters and Supervised Hard Data Conditioning [Volume 8, Issue 15, 2018, Pages 55-67]
G
-
Ghafoori, Mohammad
Effects of Stress Value and Loading Plate Dimensions on In-situ Deformation Modulus of Rock Mass in Plate Loading Test [Volume 8, Issue 16, 2018, Pages 95-106]
-
Ghalehnoee, Mohammad Hossein
Two-Dimensional Compact Inversion of Magnetic Data in the Presence of Remanent Magnetization [Volume 8, Issue 17, 2019, Pages 39-51]
-
Ghasemi, Ebrahim
Prediction of blasting-induced flyrock using M5P tree technique [Volume 8, Issue 16, 2018, Pages 45-55]
-
Ghazvinian, Abdolhadi
The effect of scale on the geometric parameters of the rock joint surfaces [Volume 8, Issue 15, 2018, Pages 99-114]
-
Gholamnejad, Javad
Discontinued Rock Slope Analysis through a New TFS-KGM Analytical Method [Volume 8, Issue 17, 2019, Pages 1-18]
-
Ghorbani, Ahmad
Two-Dimensional Compact Inversion of Magnetic Data in the Presence of Remanent Magnetization [Volume 8, Issue 17, 2019, Pages 39-51]
H
-
Hojati Tavandashti, Abedin
Investigate the effect of rock mass joint intensity on performance of support systems in the tunnel by using DFN-DEM numerical modeling (Case study: the access tunnel of Rudbar Lorestan Dam plant) [Volume 8, Issue 16, 2018, Pages 13-27]
-
Hosseini, Mehdi
Numerical Modeling Of Behaviour Of Wellbore In Shaly Formations using finite difference method (Case study: one of the oil wells in Marun Field) [Volume 8, Issue 15, 2018, Pages 115-130]
-
Hosseini, Seyed Saeed
Numerical investigation of mechanized shield tunnels cross-cut [Volume 8, Issue 16, 2018, Pages 29-43]
J
-
Jafarpour, amir
Study of the effects of the environmental factors on mining effluents phytoremediation process efficiency using cognitive map method (Case study: Sungun copper mine) [Volume 8, Issue 15, 2018, Pages 11-24]
-
Jahangoshai Rezaee, Mustafa
Study of the effects of the environmental factors on mining effluents phytoremediation process efficiency using cognitive map method (Case study: Sungun copper mine) [Volume 8, Issue 15, 2018, Pages 11-24]
-
Jalali, Meysam
Numerical investigation of mechanized shield tunnels cross-cut [Volume 8, Issue 16, 2018, Pages 29-43]
-
Jalali, Seyed Mohammad Esmail
Numerical investigation of mechanized shield tunnels cross-cut [Volume 8, Issue 16, 2018, Pages 29-43]
-
Javaheri, Mahboubeh
Dynamic Analysis of Anchored Diaphragm Walls [Volume 8, Issue 15, 2018, Pages 83-97]
K
-
Karimi Gugheri, Zohreh
Prioritizing Preventative and Repair Measures of Conveyor Belt Equipment Pieces Using Fuzzy TOPSIS Technique (Case Study: Pelletizing Plant of GolGohar Mining and Industrial Company) [Volume 8, Issue 17, 2019, Pages 63-75]
-
Khalokakaie, Reza
Mining Spare Parts Provision by Reliability Analysis, Case Study: Sungun Copper Mine [Volume 8, Issue 15, 2018, Pages 25-38]
-
KhalooKakaie, Reza
Effects of Blast Vibration on Unplanned Dilution in an Underground Metal Mine [Volume 8, Issue 17, 2019, Pages 77-90]
-
Khojamli, Allahyar
Reserve Estimation at Porphyry Copper Deposits Using Uncertainty Models in Geologic Unit Boundaries [Volume 8, Issue 15, 2018, Pages 69-81]
-
Khorasani, Emad
Numerical investigation of mechanized shield tunnels cross-cut [Volume 8, Issue 16, 2018, Pages 29-43]
-
Khosravi rad, Mohammad mehdi
Simulation of Choghart AG mill circuit using JKSimMet software and investigating the possibility of converting to SAG mill [Volume 8, Issue 16, 2018, Pages 71-85]
-
Kor, Hamid
Reserve Estimation at Porphyry Copper Deposits Using Uncertainty Models in Geologic Unit Boundaries [Volume 8, Issue 15, 2018, Pages 69-81]
L
-
Lotfian, Reza
A Developed Fuzzy Goal Programming Approach to Determine a Processing Plant Site [Volume 8, Issue 15, 2018, Pages 1-9]
M
-
Madani, Nasser
Reserve Estimation at Porphyry Copper Deposits Using Uncertainty Models in Geologic Unit Boundaries [Volume 8, Issue 15, 2018, Pages 69-81]
-
Mansouri Mohammadabadi, Soleyman
Prioritizing Preventative and Repair Measures of Conveyor Belt Equipment Pieces Using Fuzzy TOPSIS Technique (Case Study: Pelletizing Plant of GolGohar Mining and Industrial Company) [Volume 8, Issue 17, 2019, Pages 63-75]
-
Mohammadi, Mehdi
Efficiency evaluation of empirical models on the basis of rock mass rating for prediction of deformation modulus in rock mass and developing a new models according to the fuzzy system [Volume 8, Issue 16, 2018, Pages 1-11]
-
Mohebbi, Mohsen
Discontinued Rock Slope Analysis through a New TFS-KGM Analytical Method [Volume 8, Issue 17, 2019, Pages 1-18]
-
Mohseni, Madjid
Effects of Blast Vibration on Unplanned Dilution in an Underground Metal Mine [Volume 8, Issue 17, 2019, Pages 77-90]
-
Mokhberdoran, Mehdi
Mining Spare Parts Provision by Reliability Analysis, Case Study: Sungun Copper Mine [Volume 8, Issue 15, 2018, Pages 25-38]
-
Moradi, Raheleh
Comparative analysis between concentration- number (C-N) and concentration- area (C-A) fractal models for separating anomaly from background in Siahrood 100,000 sheet, NW Iran. [Volume 8, Issue 16, 2018, Pages 87-94]
N
-
Najafi, Mehdi
Comparing the “Modified Split and Fender” and “Shortwall” Methods for the Pillar Recovery in Room and Pillar Coal Mining Using A 3D Finite Difference Modeling in Tabas Central Coal Mine, Iran [Volume 8, Issue 17, 2019, Pages 27-37]
-
Nejati, Hamid Reza
The effect of scale on the geometric parameters of the rock joint surfaces [Volume 8, Issue 15, 2018, Pages 99-114]
-
Nejati, Hamid Reza
Effect of Rock Fracture Filling on Mode I and II Fracture Toughness [Volume 8, Issue 17, 2019, Pages 19-25]
-
Noroozi, Mehdi
Investigate the effect of rock mass joint intensity on performance of support systems in the tunnel by using DFN-DEM numerical modeling (Case study: the access tunnel of Rudbar Lorestan Dam plant) [Volume 8, Issue 16, 2018, Pages 13-27]
-
Nouri Gharahasanloo, Ali
Mining Spare Parts Provision by Reliability Analysis, Case Study: Sungun Copper Mine [Volume 8, Issue 15, 2018, Pages 25-38]
R
-
Rafiee, Ramin
Comparing the “Modified Split and Fender” and “Shortwall” Methods for the Pillar Recovery in Room and Pillar Coal Mining Using A 3D Finite Difference Modeling in Tabas Central Coal Mine, Iran [Volume 8, Issue 17, 2019, Pages 27-37]
-
Rafiei, Ramin
Investigate the effect of rock mass joint intensity on performance of support systems in the tunnel by using DFN-DEM numerical modeling (Case study: the access tunnel of Rudbar Lorestan Dam plant) [Volume 8, Issue 16, 2018, Pages 13-27]
-
Ranjbar bafghi, Mohammad
Simulation of Choghart AG mill circuit using JKSimMet software and investigating the possibility of converting to SAG mill [Volume 8, Issue 16, 2018, Pages 71-85]
-
Rezaei, Hooman
Evaluation of Specimen Size-Effect in Sedimentary Rocks and Grain Size Effect in Concrete Specimens on Uniaxial Compressive Strength [Volume 8, Issue 16, 2018, Pages 57-70]
-
Rezaei, Mohsen
Effects of Stress Value and Loading Plate Dimensions on In-situ Deformation Modulus of Rock Mass in Plate Loading Test [Volume 8, Issue 16, 2018, Pages 95-106]
S
-
Sadri, Saeid
Improving Filtersim Simulation Algorithm of Multiple-Point Geostatistics Using New Training Image Based Adaptive Filters and Supervised Hard Data Conditioning [Volume 8, Issue 15, 2018, Pages 55-67]
-
Shahbazi, Sina
Numerical Modeling Of Behaviour Of Wellbore In Shaly Formations using finite difference method (Case study: one of the oil wells in Marun Field) [Volume 8, Issue 15, 2018, Pages 115-130]
-
Sharifzadeh, Mostafa
Evaluation of Specimen Size-Effect in Sedimentary Rocks and Grain Size Effect in Concrete Specimens on Uniaxial Compressive Strength [Volume 8, Issue 16, 2018, Pages 57-70]
-
Sharifzadeh Lari, Mansoureh
Improving Filtersim Simulation Algorithm of Multiple-Point Geostatistics Using New Training Image Based Adaptive Filters and Supervised Hard Data Conditioning [Volume 8, Issue 15, 2018, Pages 55-67]
T
-
Talebi, Parisa
Dynamic Analysis of Embankments Reinforced with Micro-Piles [Volume 8, Issue 17, 2019, Pages 53-61]
Y
-
Yaghoobi, Mohammad
Comparing the “Modified Split and Fender” and “Shortwall” Methods for the Pillar Recovery in Room and Pillar Coal Mining Using A 3D Finite Difference Modeling in Tabas Central Coal Mine, Iran [Volume 8, Issue 17, 2019, Pages 27-37]
-
Yarahmadi Bafghi, Alireza
Discontinued Rock Slope Analysis through a New TFS-KGM Analytical Method [Volume 8, Issue 17, 2019, Pages 1-18]
-
Yousefi, Samuel
Study of the effects of the environmental factors on mining effluents phytoremediation process efficiency using cognitive map method (Case study: Sungun copper mine) [Volume 8, Issue 15, 2018, Pages 11-24]
Z
-
Zare Ahmadabadi, Habib
Prioritizing Preventative and Repair Measures of Conveyor Belt Equipment Pieces Using Fuzzy TOPSIS Technique (Case Study: Pelletizing Plant of GolGohar Mining and Industrial Company) [Volume 8, Issue 17, 2019, Pages 63-75]
Your query does not match with any item